• G1

    Open Ground Structure On Concrete Base

  • G2

    Free Land Structure On Grouding Screw

  • G3

    Single Post Mounting Structure

  • G4

    Single Post Structure, Degree Adjustable

  • H1

    Solar Mounting Structure On Tiled House Roof

  • H2

    Solar Mounting Structure for In Roof BIPV system

  • H3

    Solar Mounting Structure On Trapezoidal and Sandwich Roof

  • H4

    Solar Mounting Structure With Ballast for Flat Roof

  • H5

    Non-penetrated Flat Roof Mounting Structure

  • H515

    Non-penetrated Flat Roof Multi-fix Mounting Structure

  • H6

    FRP Made Roof Mounting Structure

  • P1

    Solar Mounting Structure At the Top Of Pole

  • C1

    Solar Canopy and Photovoltaic Parking

  • TS1

    Single axis Tracker

  • TS2

    Single Axis Tracker

  • TD1

    Dual Axis Tracker

  • O1

    The Grounding Screw For Solar Plant in open area

  • O2

    The Grounding Screw For Solar Plant in open area
Non-penetrated Flat Roof Mounting Structure
Non-penetrated Flat Roof Mounting Structure: Model H5 Aero-fit
The H5 Aero-fit Flat roof top mounting structure suitable commercial roof big areainstallation without penetration the roof top. Structure itself is light weight and high corrosion resistance.
Feature:
● Structure Design according to DIN1055 /  ASCE 7.
● Non-penetrated roof top and suitable for big area commercial roof.
● Lightweighted, minimal extra weight, avoid over-loaded for roof
● Available supply at 10o ,15o , 20o , 30o angles structure
● Fold pack for easy transportation and storage
● Warranty 10 years durability on materials and working life more than 25 years.
Product Benefit:
● Non-penetration solution.
Usually on big commercial or industrial building roof, there are big area allow for continuing installation of solar panel as a small grade power plant. The H5 is a design for such roof.The Aerodynamics design allow the structure mounted on No-Penetration roof and weight limited roof with economic cost. The system is available alternative aero-shield or weight ballast.
● Light weight
The sheet metal structure are very light weight. After installation, the average weight of structure on roof are less than 8 KG/M2
Special Specification:
For no weight loading structure, adding the aero shield at the back for against high wind speed For light weight loading structure, adding the concrete block press at the back of assembled structure.
Standard Technical Data:
Rack: Aluminum-Zinc Sheet Steel, high corrosion resistance capability and very light weight.
Fastener: Stainless Steel 304 hex bolt, dacrometed self-taping screw.
Clamp: Aluminum clamp 6063-T5.
Weather Class for different surrounding:
According to the difference of  installation area, there are several class choices
Class 1: Warm Inland & low altitude ( small wind max 125km/h, no snow, 0 ~ +65 oC)
Class 3: High land  (wind load max 125km/h, snow load max 1.4kn/m2, -20 oC~ +65 oC)
General Technical Data:
Installation Site Suitable for No Penetrations and Weight Limited roof  installation
Snow Load Tested Pass 1.4KN/ M2
Wind Load Max 100km/h
PV Module Any Aluminum Framed Panel or thin film Unframed Panel
Module Array Landscape or Portrait 1 row
Assembly Unit 1 row with any arrangment by length
Module Angle 10o  , 15o, 20o , 30o 
Material: Aluminum-Zinc Sheet Steel, Stainless Steel 304 fasteners, Aluminum press clamp,  Anti-Aging EPDM Tape
Warranty: 30 Year Working Life With 10 years quality durability on all materials
Shipment Packing: Structure are individual packed in carton and by pallet
Specification drawings:

Small component by carton plus pallet.